Flat Razor Wire
Product Description
一、Product introduction
There are two forms: single coil or crossed razor lines, which are connected by clips.
The barbed wire Concertina is a razor wire mesh that is punched and threaded on a core with a threading knife, manufactured and deployed as a coil wire. It can be used as an extra safety measure in front of or at the top of another obstacle. The number of coils in the razor wire fence can be fixed to each other at the top. The coil wire is fixed to the barrier by bolted angle iron beams by using a single razor The wire is made into a flat wrapped razor wire which is then cut to form a flat plate in the vertical direction. We usually use it with a linear razor wire mesh to build a defensive wall, or use it alone as a fence. It is commonly used in communities, mines, warehouses, prisons, defense critical sites and various military uses.
Feature:
Difficult to cut with standard tools.
Neat and unobtrusive mesh form.
Constructed from corrosion resistant galvanized steel or stainless steel for long service life.
No maintenance cost.
二、Product parameters:
Material: mild steel and hot-dip galvanized sheet and stainless steel 304 316
1、Roll diameter: 40 cms.
Length covering: 10 linear meters.
2、Blade Type: CBT 65
Number of laps: 32 in 10 meters
Distance between rounds: 30cms
Distance between center of blades:10.5 cms
Number of blade per round: 14 above and 14 below.
Total of blades per round: 28
Total of knives per roll: 896 blades.
Weight per galvanized roll of razor wire: 7.70 lbs.
Weight per Stainless steel rolls of razor wire: 7.92 lbs.
Blade thickness: 0.5mm.
3、Materials:
Galvanized steel sheet or stainless steel sheet and wire.
Razor flat fence | |||||||||||
Reference Number | Thickness | Wire Dia | Barb Length | Barb Width | Barb Spacing | Diamete | No. | ||||
BTO-12 | 0.4±0.05 | 2.5±0.1 | 12±1 | 15±1 | 26±1 | 300mm | 33 | ||||
BTO-15 | 0.4±0.05 | 2.5±0.1 | 15±1 | 15±1 | 33±1 | 450mm | 56 | ||||
BTO-22 | 0.4±0.05 | 2.5±0.1 | 22±1 | 15±1 | 34±1 | 600mm | 56 | ||||
BTO-30 | 0.4±0.05 | 2.5±0.1 | 30±1 | 18±1 | 45±1 | 700mm | 56 | ||||
CBT-25 | 0.4±0.05 | 2.5±0.1 | 25±1 | 16±1 | 40±1 | 800mm | 56 | ||||
CBT-60 | 0.6±0.05 | 2.5±0.1 | 60±2 | 32±1 | 100±2 | 900mm | 56 | ||||
CBT-65 | 0.6± 0.05 | 2.5±0.1 | 65±2 | 21±1 | 100±2 | 980mm | 56 | ||||
Core Wire Diameter | Thickness of blade | Coil Height | Coil Length | ||||||||
2.5mm±0.1mm | 0.5mm±0.05mm | 450mm | 16m | ||||||||
2.5mm±0.1mm | 0.5mm±0.05mm | 600mm | 16m | ||||||||
2.5mm±0.1mm | 0.5mm±0.05mm | 900mm | 16m | ||||||||
Flat Wrap Height | Fixed Length | Weight |
500mm/20’’ | 15m/50FT | 9.5kg(21lbs) |
700mm/30’’ | 15m/50FT | 13kg(29lbs) |
900mm/36’’ | 15m/50FT | 14.5kg(32lbs) |
Application:
Installed against the existing smooth wire mesh fence;
Fitted to the welded mesh fence;
Fitted by overlapping the fence mesh
Installed to the brick wall directly
Packing and shipping:
Flat razor wire is wrapped with paper inside and and then wrapped with woven bag.
Flat razor wire is bundled and wrapped with 5 coils, and each coils is 15 meters long.
Razor Wire Installation Accessories
SUN Security offers the following tools for installing Razor Wire, including heavy duty bolt cutters, cable tie ratchets, clip applicators and handling hooks.